Chinese translation for "position angle"

方位角
炮目高低角
位置角

Example Sentences:

	1.	Last , matlab6 . 1 as simulation tool is used to make research for the whole srd system and operating characteristics and rotor position angle estimation 最后采用matlab6 . 1软件作为仿真工具，对srd系统以及sr电机的控制特性和转子位置估算方法进行了仿真研究。
	2.	In addition , protection and display function units are added into this system . on the basis of study about working principle of previous indirect rotor - position detecting techniques , the fuzzy rules with the relation knowledge of - i - is studied in this paper as an approach for sensorless position angle estimation , and the simulation research for control performance and rotor position estimation are carried out . some experimental research on structure of srd controller is well made , and a fuzzy + pid speed controller with tms320f240 as core control unit is designed 研究了srd系统结构，对已有的主电路和驱动电路进行改进，完善了系统的各种保护和显示等功能；在对已有的无位置传感器转子位置检测原理进行研究的基础之上，根据sr电机的磁链?电流?角度之间的关系，研究了采用模糊规则无位置传感器检测方案；对srd系统的控制器结构进行研究，设计采用tms320f240高速信号处理器的fuzzy + pid控制器，研究了fuzzy + pid控制器以及系统运行中的各种保护、显示、报警等功能的设计思想和实现方法。
	3.	All of work above can work as the basic knowledge for further research for operating characteristics and simulation , the detecting principle and implementing method with sensor as the means for requirement of information about rotor position are described . next , a novel inductance method and rotor position angle estimation using fuzzy logic are studied . in this dissertation , some knowledge about error signals are detailed , at the same time , some rese arch for improving precision is also provided 通过分析有位置传感器的检测原理和实现方法，重点研究了两种无位置传感器转子位置检测方法：一是采用改进电感法(阀值电感法)的转子位置检测方法，并设计了实现方法；二是基于模糊推理规则的转子位置估算方法，针对此方法中误差信号进行分析，研究提高角度估算精度的策略和方法。
	4.	The paper has five sections include the basic knowledge and the experiment research , systematically analyses the impact of the liquid crystal box ' s position angle on the measuring result of liquid crystal lyot filter and the practical significance of this work . the work of this paper maily includes five sections : ( 1 ) the related theory of the crystal birefringence is systemicly introduced in this paper ; ( 2 ) the theory of the lc voltage - dependent birefringence is introduced ; ( 3 ) no voltage applied , changing curve between the transmission and the liquid crystal box direction is got from experiment ; ( 4 ) voltage applied , changing curve between the transmission and the liquid crystal box direction is got from experiment ; ( 5 ) desired wavelength is extract from changing the direction of liquid box . originality innovation of this paper is that the theory of the lc voltage - dependent birefringence is systemically introduced in this paper especially those related to voltage and direction 本文主要完成以下几方面工作： （ 1 ）比较系统地整理了晶体双折射的有关理论； （ 2 ）简单介绍了液晶的电控双折射特性； o ）在未加电压情况下，研究液晶盒方位角对滤光片透过率曲线的影响；厂）在加交流电压的情况下，研究液晶盒方位角对滤光片透过率曲线的影响； （ 5 ）利用方位角的调整来提取特定波长的谱线；本论文的创新之处在于比较系统地整理了晶体双折射的有关理论，特别是与电压及方向有关的理论，实验得出了滤光片透过率随液晶盒方位角变化的关系曲线，并将之运用于v吸器波长的话线朋
	5.	Liquid crystal tunable filters as an important device of wavelength division multiplexing and dense wavelength division multiplexing systems is caused attention by research department , especially many foreign research institute are studying it . but in our country its study is lag . and normal incidence of the crystal is almost the case , because the liquid crystal box is very thin , the field angle may be large and the pose of liquid crystal box may have impact on the measuring result . so , study in such subject , especially the liquid crystal box ' s position angle , is academic and valuable 各种改进液晶电光可调谐滤光片的措施的实现，使得液晶调谐滤光片成为一种很有应用前景的电光调谐滤光片，特别是用于光纤通信中的波分复用系统和密集波分复用系统，将使光纤的传输客量大大增加目前国外在这方面的研究进展很快，而国内在这方面的研究比较薄弱，而且通常采用光线正人射晶体进行研究，由于液晶盒很薄，视场角可以很大，液晶盒的摆放对测量结果影响很大，因此对该器件进行深入的研究，讨论液晶盒的方位角影响是很有必要的。
	6.	Finally , by means of comparing the theoretical tooth surface equation with the tooth surface equation included errors of cutter position and cutter position angle , the quantitative analysis of the theoretical tooth shape and the tooth shape considering the errors of cutter position and cutter position angle was curried out based on the software above . from which , the effect of errors of cutter position as well as cutter position angle on the processed tooth shape and transmitting behavior of this kind of gearing was studied 最后，通过比较双圆弧弧齿锥齿轮齿面理论方程与加入刀位及刀位角误差后的齿面方程，应用上述软件和通过进一步的数值计算，进行了无误差的理论齿形与加入刀位及刀位角误差后所得到的实际齿形之间的定量分析，比较直观、方便、准确地对刀位及刀位角误差对双圆弧弧齿锥齿轮的齿形以及传动的影响进行了初步研究。
	7.	On the basis of the principle of direct torque control , a control strategy of the grade of errors for induction motor has been proposed to improve the performance of powertrain system of hybrid vehicle in this thesis . the stator flux error , electric magnetic torque error and flux position angle are considered as control variables , and the switching states are determined by the control rules of the direct torque control 本文在直接转矩控制系统的基础上提出了一种基于误差等级的直接转矩控制dtc策略，它以电机定子磁链误差、电机电磁转矩误差及磁链位置角作为控制变量，然后根据直接转矩控制原理制定控制规则来选择开关状态，进而提高系统瞬态时的转矩响应。
	8.	In order to minimize the torque ripple of srd , the dissertation further design the intelligent torque control system , introduce the instantaneous torque control strategy based on torque distribute function , which is implemented by the flux linkage controller of srm . furthermore , considering the multi control parameter , the article also found the rotor position angle controller based fuzzy logic so as to optimize the whole control system and effectively reduce the torque ripple 为了降低srd系统的转矩脉动，本文在所建模型的基础上，设计出智能化转矩控制系统，利用转矩分配函数，提出瞬时转矩控制策略，同时采用磁链控制器来实现；考虑到srd具有可控参数多的特点，本文同时建立了优化转子位置角的模糊控制器来达到智能化转矩控制的目的，从而有效抑制sr电机的转矩脉动。
	9.	The experimental results show that the wave shaper can control the moving direction of the rod fragments after the warheads exploded and ensure the integrity rate of the rod and that there is a close relationship between the flight attitude and the positioned angle , which is mainly reflected by the rotation velocity of the rod 试验结果表明：采用波形控制器可以较好地控制战斗部爆炸后杆形破片的飞散方向，以及保证杆条的完整率；杆条的飞行姿态与放置角有密切关系，主要通过杆条旋转速度表现出来。

Similar Words：

"position and direction" Chinese translation, "position and homing indicator" Chinese translation, "position and power-law mode" Chinese translation, "position and speed mode" Chinese translation, "position and velocity computer" Chinese translation, "position applied for" Chinese translation, "position approximate" Chinese translation, "position area of the artillery" Chinese translation, "position area sketch" Chinese translation, "position at attention" Chinese translation